
Janitorial Services
in Dallas, TX
Millennium Facility Services provides janitorial services in Dallas, TX: nightly crews, day porters and floor care, written into a scope by area and frequency. We run local crews in Dallas-Fort Worth. A senior member of our operations team walks your building before we write the scope, and GPS clock-in and clock-out give you time-stamped records.
What does a janitorial contract cover in Dallas buildings?
A janitorial contract covers the cleaning a building needs every day it is in use: restrooms, trash and recycling, floors, break rooms, lobbies, glass and high-touch surfaces, against a written scope. It also covers the work around the edges: restocking, janitorial closets, day porter coverage while people are in the building, and the periodic floor and carpet work that keeps a building from wearing out early.
Dallas buildings range from high-rise towers in Uptown and downtown, where lobbies and elevators are the product tenants judge you on, to mid-rise offices along the Dallas North Tollway and LBJ Freeway, to medical offices near the Medical District and light-industrial space along Stemmons. The same program does not fit all of them, so the scope is written building by building.
If you are comparing vendors across every building type, see commercial cleaning in Dallas-Fort Worth. If you are cleaning tenant suites and corporate floors, see office cleaning in Dallas. For medical suites, see medical office cleaning in Dallas.
What does a janitorial scope look like by area?
This is a typical starting point for a Dallas building in use. We set the real scope after the walkthrough, based on traffic, floors and what is going wrong today.
| Area | Daily | Weekly, monthly or quarterly |
|---|---|---|
| Restrooms | Clean and disinfect fixtures, restock, empty trash, mop | Detail partitions and vents weekly. Descale fixtures monthly. Deep clean grout quarterly |
| Lobbies and elevators | Dust and damp mop, glass and door cleaning, wipe elevator cabs and touch points, trash | Detail metal and furniture weekly. Machine scrub or refinish hard floors quarterly |
| Offices and work areas | Trash and recycling, spot clean, vacuum high-traffic carpet | Dust surfaces weekly. High and low dusting monthly. Carpet extraction quarterly |
| Break rooms and kitchenettes | Wipe counters, tables and sinks, empty trash, floors | Clean appliance exteriors weekly. Inside microwaves and refrigerators monthly |
| Corridors, stairwells and garages | Sweep, mop or vacuum, empty trash | Spot clean walls and doors weekly. Pressure or machine clean on a rotation |
| Day porter coverage | Restrooms and lobbies kept presentable while the building is open | Set by traffic and tenant count |
Tenant desks and keyboards are cleaned only on request. We write down who owns shared items such as refrigerators and break room supplies so nobody assumes the other party does it.
What does one line of a written scope look like?
This is an illustrative example of how we write a line for this kind of building. It does not describe any client's site. Each line has a task, a frequency, an owner and a way for you to see it done.
| Area | Task | Frequency | Owner | How you see it |
|---|---|---|---|---|
| Tower lobby and elevator cabs | Floors, glass, elevator cab and touch-point wipe, trash | Nightly, day porter by traffic | Night lead, day porter lead | QR scan at the lobby and each elevator bank, photo, timestamp |
How do you know the cleaning actually happened?
Our software, MillenniumOS, records GPS clock-in and clock-out with time stamps. Crews check in to rooms by QR code and photograph the finished work, and you see the result on a live client dashboard instead of waiting for a report. Our service completion rate is 99.7%, GPS-verified, and the same QR check-in runs on a single suite as on a large site. See the MillenniumOS dashboard.
How do you choose a janitorial services company in Dallas?
Start with what clean means for your building, then ask each vendor the same questions and compare proposals line by line.
Ask every vendor
- Who walks my building, and who writes the scope?
- How will I know each visit happened, and can I see last night's record?
- Who supervises the crew, and who do I call when something is missed?
- Can I reach the owner if a problem is not resolved?
- What is not included in this quote?
- Can I see a certificate of insurance?
Red flags
- A firm price with no walkthrough.
- A bid far below the others with no explanation of scope.
- No way to show what was done on a given night.
- A long auto-renewing contract with no exit for poor service.
- Nobody with authority to call you back.
How do you switch cleaning companies without leaving the building uncovered?
Switching is a small project when someone owns it. Keep the current service running until the new team is trained.
- Step 1
Read the current agreement
Find the term, the auto-renewal language and the notice period, and give written notice on the schedule the contract requires.
- Step 2
Walk the building
We record floors, restrooms, problem areas and access, and note what is going wrong today.
- Step 3
Settle scope and access
You get the scope in writing by area and frequency. Keys, codes and alarm procedures are agreed before the first night.
- Step 4
Train, start and review
A dedicated team is trained on your building. Verification turns on from the first visit, and we review the first scores with you.
See the full transition process.
What do we actually run in Dallas-Fort Worth, and what is our record elsewhere?
Our one named DFW account is a distribution center, not an office, clinic or retail building, and we would rather you hear that from us. What carries over to your building is the method: a walkthrough, a written scope, and GPS clock-in and clock-out records. The other results below are Georgia work. To click through a sample account, see See It Work.
Janitorial Services in Dallas, TX: common questions
What facility, plant and property managers ask us before they hire.
Millennium Facility Services provides janitorial services in Dallas. We are based in Alpharetta, GA, have been in business since 1990, and run local crews in Dallas-Fort Worth. In DFW we service Southwire's distribution center in the Haslet and Alliance area of north Fort Worth. A senior member of our operations team walks your building before we write the scope.
Most contracts are a fixed monthly price built from a written scope: area, frequency, floor types, restroom count and the hours we can work. Some buildings with variable demand prefer hourly pricing, and one-time work such as floor restoration or carpet extraction is quoted per project. Ask any vendor which model you are being offered and what is excluded.
You send us the address, the hours the building can be cleaned and your current scope. We book the walkthrough. At the walk we look at the size of the space, the floor types, the restroom count, the traffic and the standard you expect, and those drive the labor, supplies and supervision in the price. After the walk you get a written scope by area and frequency, with the price. We do not quote from a phone call.
We carry general liability and workers' compensation coverage, and we send a certificate of insurance on request, with your organization named as additional insured if your contract requires it.
Call your account contact and we fix it. Time-stamped records show when crews were on site, so we can see what happened and find the cause, and you can reach the owner directly if it is not resolved.
Janitorial services are the recurring daily and weekly work in a building in use. Commercial cleaning is the wider term and includes periodic and project work such as floor refinishing and carpet extraction. Most Dallas buildings need both, and we scope them together.
Yes. A day porter keeps restrooms, lobbies and elevators presentable while the building is open. Coverage is set by traffic and tenant count and written into the scope.
Yes. Multi-tenant buildings have shared lobbies and restrooms that have to work around several schedules, so we write common areas and tenant suites as separate lines and agree who owns each.
Yes. Crews clock in and out with GPS and timestamps, rooms are checked in by QR code and finished work is photographed, so you can check last night's record against the scope on your dashboard.
Related services and resources
Tell us about your Dallas building
Send us the address, the hours and what is not working today. We will walk it with you and write the scope.