Skip to main content
Industrial manufacturing facility served by Millennium Facility Services
Industrial Deep Cleaning, Atlanta and Georgia

Industrial Cleaning Services
in Atlanta, GA

Millennium Facility Services provides industrial cleaning services in Atlanta: deep cleaning, floor and equipment surface restoration, shutdown and turnaround cleaning, and high dusting. We have been in business since 1990 and serve 27+ Southwire facilities, plus a fiber optics manufacturer we have cleaned for seven years. A senior member of our operations team walks your building before we write the scope, and GPS clock-in and clock-out give you time-stamped records.

27+
Southwire facilities served
Since 1990
in business, based in Alpharetta, GA
99.7%
service completion rate
Timestamped
visits, with photos

What is industrial cleaning, and how is it different from plant janitorial?

Industrial cleaning is the heavy, scheduled work a nightly route cannot do: a deep clean of the whole building, restoring floors and equipment surfaces, cleaning during a shutdown or turnaround, and high dusting of overhead structure. It is a project with a start date, an end date and a written scope.

Recurring plant janitorial is the opposite job. It is the ongoing program that keeps the building at a standard. If that is what you need, see manufacturing cleaning in Atlanta or our manufacturing cleaning services program for plants across Georgia. Many plants need both. A deep clean resets the building, and the recurring program holds it there.

What industrial cleaning projects do we scope?

Every project is written after a walkthrough with your plant manager, EHS lead or maintenance lead. These are the four project types and what each one needs from both sides.

ProjectWhat is includedHow it is scheduledWhat we need from you
Deep cleaningFloors, walls, dock and receiving areas, restrooms, break rooms and the surfaces a normal week does not reachIn a window your production supervisor signs off on, by zoneAccess, an escort, a list of off-limits areas and safety data sheets for your own materials
Floor and equipment restorationFloor cleaning and restoration of what is recoverable, plus cleaning of equipment exteriors and housingsAround production runs, by areaYour team de-energizes, locks out and releases any equipment. We clean after your release
Shutdown and turnaround cleaningCleaning sequenced into your outage window, working with the tradesTo your outage calendar. We agree who can pause or stop work before the outage startsThe outage schedule, utilities, lift access and any permits your site requires
High dustingOverhead structure, ducts, ledges, light fixtures and racking tops, worked top down before floor cleaningAhead of floor work, in zones your team clearsWhat is energized, the type of dust in the area, and lift or access requirements

Anything outside the written scope is quoted separately. We price a project from the scope, not from a flat rate, so we quote after the walkthrough.

What does your team own, and what is outside our scope?

A plant is not an office with bigger floors. Energy control, process hazards and permits belong to your site, and we work to your rules.

How we work

  • Crews complete your site safety orientation before they work in the plant.
  • Your authorized employees handle lockout and tagout. We stay out of any area under lockout and do not clean inside machinery.
  • Crews wear the PPE your plant requires for each zone, confirmed at the walkthrough.
  • Your EHS team gets a list of the products we plan to use, with a safety data sheet for each, before we start.
  • We use EPA-registered disinfectants where disinfecting is needed, applied to the label.

What stays outside this work

  • Hot work.
  • Permit-required confined spaces.
  • Hazardous material remediation. If a hazard is present, your team tells us where, and we clean to your written procedure.
  • Combustible dust control beyond routine surface and floor work. Where dust is a hazard, we follow your written procedure and scope it as specialty work.
  • Cleaning inside equipment that has not been made safe by your authorized employees.

How does an industrial cleaning project run?

We do not promise a start date before the walkthrough, because access, orientation and your production or outage calendar set it.

  1. Step 1

    Walk the building

    A senior member of our operations team walks the areas, the hazards and the access routes with your plant manager and EHS lead before any scope is written.

  2. Step 2

    Write the scope and the sequence

    We write what is cleaned, in what order, in which window, and who clears each area. Your EHS team gets the product list and safety data sheets.

  3. Step 3

    Orient the crew and settle access

    Crews complete your site orientation. Badges, gates, keys and the shift contact are agreed in writing before the first shift.

  4. Step 4

    Do the work and keep the record

    GPS clock-in and clock-out give you time-stamped records, rooms and zones are checked in by QR code and finished work is photographed. The record is on your dashboard.

Completion is measured against the written scope, not against whether the building looks clean.

Can you restore a floor with years of buildup?

Often, but not always completely. Soil that has built up for years cannot always be fully removed, and we say so at the walkthrough instead of promising a result we cannot back up. We look at the floor type, what is on it and what the floor will tolerate before we choose a method.

After a restoration, frequent lighter cleaning does more than occasional heavy cleaning. For the floor types we work on, see floor care services. We run autonomous floor scrubbers at Georgia Aquarium, and whether your aisles suit one is a layout question we answer on site, not on a web page.

Can you clean while production is running?

Sometimes. It depends on the area and on who can isolate it. We agree which lines are running, which areas are down and which are lockout zones before work begins, and our site lead talks to your shift supervisor at handoff. Production has priority, and we work around it.

Shutdowns are different. The building is down, the trades are in, and the window is short. We sequence the cleaning into your outage calendar and agree who has the authority to pause work before the outage starts, not during it.

What about high dusting and dust hazards?

High dusting is worked from the top down so dust does not fall onto cleaned floors. We need to know the type of dust, what is energized and how we reach the work. Our high dusting guide explains the method.

Dust that is combustible is a different subject. Your hazard analysis governs it, and we follow your written procedure and do not use methods your procedure forbids. We do not describe ourselves as combustible dust specialists. Ask your EHS lead what your procedure requires before you scope this work with any vendor.

What does the visit record show?

Time-stamped records on your dashboard mean you can check last night's work against the written scope instead of taking our word for it.

On your dashboardWhat it tells you
Arrival and departure timesWhen the crew was on site and how long they stayed, from GPS clock-in and clock-out records
QR check-in by room or zoneWhich rooms and zones were visited, not just that someone was in the building
Photographs of finished workWhat the area looked like when the crew finished
One view across sitesEach site sees its own record, and a multi-site buyer sees all of them side by side

A check-in proves a visit happened and photographs show the work. Your own inspection is how you confirm it meets your standard, and we welcome it. To click through a sample account, see See It Work.

Industrial cleaning services: common questions

What plant managers, EHS leads and maintenance directors ask us.

Millennium Facility Services, based in Alpharetta, provides industrial cleaning in Atlanta and across Georgia: deep cleaning, floor and equipment restoration, shutdown and turnaround cleaning, and high dusting. We have been in business since 1990 and serve 27+ Southwire facilities.

Industrial cleaning is project work with a start, an end and a written scope: deep cleans, restoration, shutdowns and high dusting. Plant janitorial is the recurring program that runs on a schedule. Many plants use both, a deep clean to reset the building and a recurring program to hold it.

We price from a written scope, so we quote after the walkthrough. The drivers are the zones and tasks, the number of shifts, floor type and condition, lift and access needs and the type of dust. A flat rate that covers everything from offices to dock pits is a guess, and a quote that arrives without anyone walking the building is the same guess.

A senior member of our operations team walks it with your plant manager and EHS lead before we write the scope. We look at the areas, the access, the hazards and your production or outage calendar.

Sometimes. It depends on the area and on who can isolate it. We agree which areas are active, which are down and which are off limits before we start, and our site lead coordinates with your shift supervisor.

Access, an escort, a list of off-limits areas, the production or outage schedule, lift access where needed, and safety data sheets for your own materials. Your team handles lockout and tagout and releases any equipment before we clean it.

No. Your authorized employees de-energize and release equipment, and we clean the exterior surfaces after release. We stay out of any area under lockout and do not clean inside machinery.

Not as part of this program. Hot work and permit-required confined spaces are outside our scope. If a hazard is present, your team tells us where and we clean to your written procedure. We do not describe ourselves as a hazmat or spill response contractor.

GPS clock-in and clock-out give you time-stamped records, rooms and zones are checked in by QR code, and finished work is photographed. You see it on your dashboard, and our service completion rate is 99.7%. We measure completion against the written scope.

EPA-registered disinfectants where disinfecting is needed, and standard floor and restroom products. Your EHS team gets the product list with a safety data sheet for each one before we start, and no product is used on site unless it is on that list.

Often, but not always completely. We look at the floor type and the buildup at the walkthrough and tell you plainly what we expect before the work starts. Frequent lighter cleaning afterward keeps the result.

Yes. The project record shows what the building needs, which makes the recurring scope easier to write. See our manufacturing cleaning services for the recurring plant program.

Your account contact is the person to call, and you can reach the owner directly if it is not resolved. A supervisor covers a missed shift, and time-stamped records mean a missed area shows up in the record that night.

We carry general liability and workers' compensation coverage, and we send a certificate of insurance on request, with your organization named as additional insured if your contract requires it.

We are an IICRC certified firm, we use EPA-registered disinfectants, and we have been in business since 1990. We are minority and woman owned, though not certified as such. If your supplier-diversity program requires certification, we say so up front.

Tell us what your building needs

Send us the building, the schedule and what is not working today. We will walk it with you and write the scope.