Skip to main content
Warehouse aisle with racking and a clean concrete floor
Warehouse Cleaning, Metro Atlanta

Warehouse Cleaning Services
in Atlanta, GA

Millennium Facility Services provides warehouse cleaning services in Atlanta: floors, dock and receiving edges, restrooms, break rooms and offices, scoped to your building and not to a template. We are based in Alpharetta, have been in business since 1990 and serve 27+ Southwire facilities. A senior member of our operations team walks your warehouse before we write the scope, and GPS clock-in and clock-out give you time-stamped records.

DFW
Southwire distribution center serviced
27+
Southwire facilities served
7 years
with one fiber optics plant
Since 1990
in business, based in Alpharetta, GA

What does warehouse cleaning in Atlanta include?

We split the building into zones and set a task list, a frequency and a way to prove the work for each. A warehouse floor, a dock edge, a mezzanine, a restroom block and an office are different jobs with different equipment and different timing, so a single square foot figure does not describe them.

This page is for general storage and industrial buildings in metro Atlanta. If your building runs round-the-clock dock operations with pick waves and trailer turns, see distribution center cleaning. For warehouses in more than one market, see warehouse cleaning services.

How do we scope a warehouse by zone?

Frequency follows traffic, forklift routes and use. We set it at the walkthrough with your warehouse manager, not from a calendar.

ZoneWhat we scopeWhat decides the frequency
Warehouse floor and aislesSweeping to pull loose debris, then scrubbing for the soil sweeping leaves, plus spill and debris controlTraffic, forklift routes and what is stored
Dock and receiving edgesApron and door areas, debris, entry mats, high-touch pointsTruck and foot traffic
Mezzanines and overhead surfacesLedges, fixtures and racking tops, priced separately once heights and access are knownDust load and what sits below
Restrooms and break roomsClean first, then disinfect with EPA-registered products, restock, floorsHeadcount and shift pattern, not the clock
Offices and dispatch roomsTrash, vacuum, glass, kitchenettes, high-touch surfacesRegular schedule, after hours
Entries and lot-facing doorsEntry mats and the dirt that tracks in from the lotSeason and weather
Vacant or turnover spaceCleaning to the lease terms and the condition on entryScoped per move, after a walk with the property manager

Who owns what matters in shared buildings. At the walkthrough we ask your team and ours what each side actually cleans, so nothing falls between us.

How do you clean warehouse floors?

Sweep first, then scrub. Scrubbing over loose debris only moves it around. Loose debris and spills on forklift routes are where slips and delays start, so we start with the floor, then spend time on the surfaces people touch: door handles, time clocks, restrooms and break rooms.

Our autonomous floor scrubbers run at Georgia Aquarium. For a warehouse, we look at your aisles and route at the walkthrough and tell you whether one fits. Where one does, the machine handles open runs and crews handle edges, corners and detail. For more on floor methods, see our warehouse floor cleaning guide.

Can you handle move-out and turnover cleaning?

Yes, as a scoped project. For property managers and tenants, turnover cleaning means getting the space ready for the next occupant or for a lease-end inspection. The walkthrough matters even more here, because clean has to be agreed against the lease language and the condition on entry. We document the walk with photos so both sides see the same starting point.

How does a warehouse cleaning program start?

We do not promise a start date before the walkthrough, because access, crew orientation and your safety review set it.

  1. Step 1

    Walk the building

    A senior member of our operations team walks the floor, docks and common areas with you before the scope is written.

  2. Step 2

    Write the scope by zone

    We write tasks, frequency and shifts for each zone, and send your safety team our product list with a safety data sheet for each.

  3. Step 3

    Orient the crew and settle access

    Crews complete your site safety orientation. Gate access, keys and the shift contact are agreed in writing.

  4. Step 4

    Go live and keep the record

    GPS clock-in and clock-out give you time-stamped records, rooms are checked in by QR code and finished work is photographed, all on your dashboard.

How do your crews work safely around forklifts and freight?

Forklift traffic, wet floors and moving freight change how the work is done. We work to your rules, and we settle them at the walkthrough.

How we work

  • Crews complete your site safety orientation before they work on your floor.
  • Crews wear the PPE your site requires for each zone, confirmed at the walkthrough.
  • We follow your forklift and pedestrian traffic rules and close an aisle only with your operations lead's agreement.
  • Your team gets a product list with a safety data sheet for each product before we start.

What stays under your control

  • Your forklift and pedestrian routes, and any area you mark off limits.
  • Lockout and tagout. We stay out of any area under lockout and do not clean inside machinery.
  • Your incident reporting and safety program. We report hazards we find and clean to your housekeeping standard.

What does the visit record show?

Time-stamped records on your dashboard mean you can check last night's work against the written scope instead of taking our word for it.

On your dashboardWhat it tells you
Arrival and departure timesWhen the crew was on site and how long they stayed, from GPS clock-in and clock-out records
QR check-in by room or zoneWhich rooms and zones were visited, not just that someone was in the building
Photographs of finished workWhat the area looked like when the crew finished
One view across sitesEach site sees its own record, and a multi-site buyer sees all of them side by side

A check-in proves a visit happened and photographs show the work. Your own inspection is how you confirm it meets your standard, and we welcome it. To click through a sample account, see See It Work.

Warehouse cleaning in Atlanta: common questions

What warehouse managers, property managers and tenants ask us.

Millennium Facility Services, based in Alpharetta, GA, provides warehouse cleaning in metro Atlanta. We have been in business since 1990 and serve 27+ Southwire facilities, including distribution.

We serve metro Atlanta from our Alpharetta office and confirm coverage for your address on the first call.

Warehouse cleaning covers general storage and industrial buildings. Distribution center cleaning is built around round-the-clock dock operations, pick waves and trailer turns, and is covered on our distribution center cleaning page.

We price from a written scope, so we quote after the walkthrough. The drivers are the zones and tasks, frequency, shifts, floor type and floor area. A price set from the web page or from square footage alone is a guess, so we do not publish a per-square-foot figure.

A senior member of our operations team walks your building first and then the scope is written, zone by zone, with a task list and a frequency for each.

Yes, around your operation. We agree which areas are active and which are off limits, and we coordinate with your shift supervisor so crews are not in the way of forklifts or freight.

We sweep first to pull loose debris and then scrub for the soil sweeping leaves. Frequency follows traffic and forklift routes. Whether an autonomous scrubber fits your layout is decided at the walkthrough.

They run at Georgia Aquarium. In your warehouse we look at the layout and route at the walkthrough and tell you whether one fits, and crews still handle edges and detail.

GPS clock-in and clock-out give you time-stamped records, rooms are checked in by QR code and finished work is photographed. It is on your dashboard, and our service completion rate is 99.7%.

We are an IICRC certified firm and use EPA-registered disinfectants. We are minority and woman owned, though not certified as such.

Yes, scoped against the lease and the condition of the space after a walkthrough, with photos so both sides see the same starting point.

EPA-registered disinfectants where disinfecting is needed, and standard floor and restroom products. Your team gets a product list with a safety data sheet for each before we start.

Your account contact is the person to call, and you can reach the owner directly if it is not resolved. A supervisor covers a missed shift, and time-stamped records mean a missed area shows up in the record that night.

We carry general liability and workers' compensation coverage, and we send a certificate of insurance on request, with your organization named as additional insured if your contract requires it.

Use the request button on this page or call (800) 956-8745. A senior member of our operations team walks your building before we write the scope.

Tell us about your warehouse

Send us the building, the hours and what is not working today. We will walk it with you and write the scope.